Search Now

All products in : Seals & Hole Tidies


These fittings give a draught, water proof and well designed solution to the problem of passing hoses/cables etc, through walls, floors and other surfaces.



Showing page 1 of 240 items in Seals & Hole Tidies
1
    
2
66mm ID Hose Floor Plate 66mm ID Hose Floor Plate  (1100)
66mm ID Hose Floor Plate
93mm Hole Tidy OD 160mm93mm Hole Tidy OD 160mm (7185101)
93mm ID x 160mm OD Hole Tidy. This hole tidy is an ideal product for tidying the area around the toilet pan connector when fitted through the floor.
110mm Hole Tidy 170mm OD White110mm Hole Tidy 170mm OD White (7184101)
110mm ID x 170mm OD Hole Tidy. This hole tidy is an ideal product for tidying the area around the toilet pan connector when fitted through the floor.
4 Hole, 11mm Hole Tidy4 Hole, 11mm Hole Tidy (7197000)
The 4 hole 11mm hole tidy fits in line with the Danfast Gas Manifold. Holes are 11mm diameter and the tidy will fit over a 120mm x 15mm routed slot. The tidy is made up of 2-mirrored components that can be fitted around the gas pipe after the pipes have been fitted to reduce drafts and prevent water ingress etc.
25-28mm Floor Seal 125mm OD.25-28mm Floor Seal 125mm OD. (7195050)
25-28mm Floor Seal 125mm OD. This seal is idealy suited for use with 1320440 28mm rigid waste pipe and provides a weather tight seal.
4 Hole Oval Floor Seal 4 Hole Oval Floor Seal  (7199050)
The 4 hole oval hole tidy fits a gas Manifold. There are 4 slots in the seal and the oval will fit over a 120mm x 15mm routered slot. This product is made up of 2 components, a rigid outer frame and an inner gasket.
50mm Harness seal, 20mm tail.50mm Harness seal, 20mm tail. (7181050)
The 50mm harness seal is ideally suited for electrical cables. The star seal will accommodate an electrical harness and a range of cable sizes. Underneath the seal is a 20mm tail. Hole size required for cutting is 50mm. Hole centre is 9mm.
35mm Harness seal, 20mm tail.35mm Harness seal, 20mm tail. (7182050)
The 35mm harness seal is ideally suited for electrical cables. The star seal will accommodate an electrical harness and a range of cable sizes. Underneath the seal is a 20mm tail. Hole size required for cutting is 35mm. Hole centre is 9mm.Other colours
15mm ID Pipe Seal15mm ID Pipe Seal (7187)
The 15mm pipe seal is designed to push fit directly into a 25mm diameter hole. The barbs down the side will grip into the floor to give a secure fixing. Tail length 60mm, 15mm ID.
8-15mm Pipe Seal 75mm Tail 8-15mm Pipe Seal 75mm Tail  (4504100)
8-15mm pipe seal with 75mm tail.
8-15mm Pipe Floor Seal 50mm tail8-15mm Pipe Floor Seal 50mm tail (4500)
8-15mm pipe floor seal with 50mm tail. Various colours available
13mm ID Floor Plate13mm ID Floor Plate (4510)
13mm ID floor plate, various colours available.
34mm ID Floor Plate34mm ID Floor Plate (4520)
34mm ID Floor Plate, various colours available.
32-40mm Pipe Seal32-40mm Pipe Seal (7193)
The 32-40mm pipe seal is designed to screw flush to the floor and can fit a pipe of 32mm - 40mm OD.
10mm Pipe Seal 60mm tail10mm Pipe Seal 60mm tail (9187)
The 10mm pipe seal is designed to push fit directly into a 25mm diameter hole. The barbs down the side will grip into the floor to give a secure fixing. This seal is ideally suited for a 10mm radiator pipe going through a floor or other surface. Tail length 60mm, 10mm ID. Other colours can be produced depending on quantities.
10mm Pipe Seal 27mm tail10mm Pipe Seal 27mm tail (9188)
The 10mm pipe seal is designed to push fit directly into a 25mm diameter hole. The barbs down the side will grip into the floor to give a secure fixing. This seal is ideally suited for a 10mm radiator pipe going through a floor or other surface. Tail length 27mm, 10mm ID.
8-15mm Seal 10mm Tail8-15mm Seal 10mm Tail (7179)
8-15mm Seal 10mm Tail.
25-28mm 130 PCD Seal Black25-28mm 130 PCD Seal Black (7196050)
25-28mm Floor Seal 130 PCD. This seal is idealy suited for use with 1320440 28mm rigid waste pipe and provides a weather tight seal.
110mm Tidy Flat Edge110mm Tidy Flat Edge (7183101)
110mm ID x 170mm OD Hole Tidy flat edge. This hole tidy is an ideal product for tidying the area around the toilet pan connector when fitted through the floor.
15mm Pipe Seal 27mm Tail 15mm Pipe Seal 27mm Tail  (9186)
The 15mm pipe seal is designed to push fit directly into a 25mm diameter hole. The barbs down the side will grip into the floor to give a secure fixing. This seal is ideally suited for a 10mm radiator pipe going through a floor or other surface. Tail length 27mm, 15mm ID.
Showing page 1 of 240 items in Seals & Hole Tidies
1
    
2
Need Help?
need help? Call or email us now. For all enquiries please feel free to contact a member of our staff using the details below:
Tel
+44 (0)1476 564549
Fax
+44 (0)1476 567538
Email
sales@dlsplastics.co.uk