Search Now

All products in : New Products


A range of new products. The new products shown in this category were all produced within the past 12 months.



Showing page 1 of 119 items in New Products
Gas Strut + BracketsGas Strut + Brackets (TP000239)
Gas Strut + Brackets. This gas strut can be mounted to aid simple opening and closing of any doors or lockers. Mounting brackets are provided to simplify installation.
10mm Pipe Seal 60mm tail10mm Pipe Seal 60mm tail (9187)
The 10mm pipe seal is designed to push fit directly into a 25mm diameter hole. The barbs down the side will grip into the floor to give a secure fixing. This seal is ideally suited for a 10mm radiator pipe going through a floor or other surface. Tail length 60mm, 10mm ID. Other colours can be produced depending on quantities.
165mm Multi Strap 165mm Multi Strap  (8166050)
165mm Multi Strap Black. This multi strap gives a flexible clipping mechanism for attaching cables and pipes etc. 11 x 4mm holes allow for a no6 screw. Other colours or materials can be produced depending on volumes, please call for details.
10mm Pipe Seal 27mm tail10mm Pipe Seal 27mm tail (9188)
The 10mm pipe seal is designed to push fit directly into a 25mm diameter hole. The barbs down the side will grip into the floor to give a secure fixing. This seal is ideally suited for a 10mm radiator pipe going through a floor or other surface. Tail length 27mm, 10mm ID.
25mm Door Stop Spacer25mm Door Stop Spacer (6129)
A 25mm door stop spacer to fit under the DLS door stop, code 6130. A range of colours are available please ask for details.
Pro-Tile Roof Cowl, GraphitePro-Tile Roof Cowl, Graphite (3544)
The DLS Pro-Tile roof cowl and vent has been designed to give a free area ventilation of at least 20,000sqmm required by EN 721, if installed correctly. The Ceiling Vent & Roof Cowl are supplied as a complete kit. The roof cowl contains an adapter that should be sealed and fixed with screws (not supplied) to the roof of the caravan and is then covered with a cowl and fixed with the cowl screws (supplied). The cowl is fitted over a box section that is constructed between the ceiling and the roof. (Box section hole required ID 195mmsq).
Former 27.5mm Rad x 22mmFormer 27.5mm Rad x 22mm (6381441)
27.5mm Rad x 22mm corner former for Dometic Potti Door. Plastic mouldings to form the corners of doors, cupboards and windows etc. These items are colour coded for ease of identification.
Webbing Black 19mm x 50MWebbing Black 19mm x 50M (5105050)
Webbing Strap, Black 19mm x 50M.
Folding Clothes Hook DoubleFolding Clothes Hook Double (7152)
(COMING SOON -PLEASE CONTACT US FOR DETAILS) Double clothes hook. A range of colours can be moulded depending on quantities, please call for details.
Gravity Vent 100mm, 35mm tail.Gravity Vent 100mm, 35mm tail. (7099)
100mm/4" Cooker hood through wall gravity vent, extractor vent to fit a 100mm/4" flexible ducting. Tail depth 35mm. A range of colours are available please ask for details
28° Spacer Euro White28° Spacer Euro White (8133)
28° Spacer round spacer washer. 20mm dia x 6mm dia hole.
M5 Mounting SpacerM5 Mounting Spacer (8318001)
M5 Mounting Spacer. 35mm x 15mm x 5mm.
327mm x 68mm Bridged Handle327mm x 68mm Bridged Handle (New)
Lightweight Nylon Chrome Bridged Grab Handle, ideally suited for use as an internal grab handle in a Touring Caravan or Motorhome. 2-part plastic construction allows easy installation and maintenance, while chrome plated finish provides stylish but hard wearing exterior. The Lid and base can easily be fitted together using interference fit, no screw required. Total weight: 130g
Skirting Cover CornerSkirting Cover Corner (8456)
47mm high skirting cover corner. This product can be bonded into place and is available in a range of colours, please call for details.
Skirting Cover LH & RH PairSkirting Cover LH & RH Pair (8457)
47mm high skirting cover LH & RH. This product can be bonded into place and is available in a range of colours, please call for details.
1¼" BSP Flange Nut Euro White1¼" BSP Flange Nut Euro White (8047002)
1¼" BSP Nut with flange. Available in a range of colours depending on quantities.
Vanity Bowl Sinkwaste 1¼" BSPVanity Bowl Sinkwaste 1¼" BSP (2050002)
The plastic Vanity Bowl Waste is suitable for clamping a washbowl to a work surface. The outlet is designed to fit onto the DLS 28mm waste system and can be used as an alternative to a domestic click clack waste. Supplied with plug and gaskets. Hole size required 45mm. Fixing nut 1¼" BSP is sold separately, code 8047 Other colours can be produced depending on quantities, please call for details.
Recessed Handle BlackRecessed Handle Black (8101050)
Recessed handle, Black (matt finish) Rectangular recessed handle, widely used in speakers, cabinet, drawer, etc. Easy to fix with 4 screw holes. Hole size required, 100mm x 62mm. A range of colours can be produced depending on quantities, please contact for details.
Gravity Vent 100mm, 10mm tail.Gravity Vent 100mm, 10mm tail. (7110)
100mm/4" Cooker hood through wall gravity vent, extractor vent to fit a 100mm/4" flexible ducting. Tail depth 10mm. A range of colours are available please ask for details
Showing page 1 of 119 items in New Products
Need Help?
need help? Call or email us now. For all enquiries please feel free to contact a member of our staff using the details below:
Tel
+44 (0)1476 564549
Fax
+44 (0)1476 567538
Email
sales@dlsplastics.co.uk